How to Fix a Vuse Alto Not Hitting – A Comprehensive Troubleshooting Guide

The Vuse Alto is a sleek and compact vaping device known for delivering satisfying puffs. However, like all electronic devices, it can occasionally encounter issues that disrupt its functionality. One common problem users face is the Vuse Alto not hitting. If you find your Alto is not producing vapor, don’t fret; resolving this issue is often easier than you think. This comprehensive troubleshooting guide will walk you through a series of steps to help you diagnose and fix the problem, leaving you back to enjoying your favorite e-liquids in no time.

22 How To Fix Vuse Alto Pod Not Hitting 10/2022 - Emvaobep US

1. Check the Battery Life

When your Vuse Alto is not hitting, the first thing to check is the battery. A depleted battery is the most common reason why a vape pen fails to activate. Connect your Alto to its charger and allow it to charge fully before attempting to use it again. When charging, the device’s LED indicator will illuminate red; once the battery is full, the light will turn green.

2. Ensure Proper Cartridge Fit

Another potential cause for a Vuse Alto not hitting is an improperly fitted cartridge. Remove the cartridge and inspect the connection points for any debris or e-liquid buildup. Clean the contacts with a cotton swab or rubbing alcohol, ensuring they are free from any residue. Reinsert the cartridge firmly into the device, ensuring it clicks securely into place.

3. Replace the Pod

If cleaning the cartridge contacts doesn’t resolve the issue, it may be time to replace the pod. Vuse Alto pods are designed for a specific number of uses and eventually need to be replaced. Replace the pod with a new one and check if your device is now hitting properly.

Why is my vuse not hitting? How to fix vuse alto not hitting - Trung ...

4. Examine the Airflow Sensor

The airflow sensor is responsible for detecting your puff and initiating the vaping process. Check if the airflow sensor is blocked or restricted. Gently blow into the device to clear any blockages, being careful not to use excessive force.

5. Inspect the Coil

The coil inside the cartridge is responsible for heating the e-liquid and producing vapor. If the coil is burnt or damaged, it can inhibit the device from hitting. Remove the cartridge and look at the coil. If it appears scorched or darkened, replace the cartridge with a new one.

6. Reset Your Device

If none of the previous steps resolve the issue, try resetting your Vuse Alto. Locate the reset button, insert a small pin or paperclip, and press and hold it for a few seconds until the LED indicator flashes. This process clears any potential electronic glitches that may hinder the device’s operation.

7. Seek Professional Support

If you’ve followed all the troubleshooting steps outlined above and your Vuse Alto is still not hitting, it may require professional attention. Contact Vuse customer support or your local vape shop for further assistance. They can diagnose the problem more precisely and provide guidance on necessary repairs or replacements.

How To Fix Vuse Alto Not Hitting


Troubleshooting a Vuse Alto not hitting can be a straightforward process with a few simple steps. By checking the battery life, inspecting the cartridge connection, replacing the pod, examining the airflow sensor and coil, resetting your device, and seeking professional support if needed, you can increase the chances of resolving the issue and getting back to enjoying your Vuse Alto. Remember to always handle your vaping devices with care and follow the manufacturer’s instructions to ensure optimal performance and longevity.

You May Also Like